Wound Cartridge Filter

Our product range includes a wide range of 30 inch wound cartridge filter, 20 inch wound cartridge filter and 10 inch wound cartridge filter.

30 Inch Wound Cartridge Filter

₹ 100 /Piece Get Latest Price

MaterialPolypropylene, Cotton (CFR 21 Listed) & Glass Fibre Heat Purified
Length30 Inch
Operating TemperaturePP- 80 Degree C, Cotton with SS Core-120 Degree C, Glass Fibre with SS Core- 400 Degree C
CorePolypropylene, Tinned Steel, Stainless Steel 304 & 316
Inner Diameter28 mm
TypeWound
End ConnectionsDOE ( Standard ) / SOE (on demand)
Outside Diameter100 mm
Removal Ratings1, 3, 5, 10, 25, 50, 75, 100 Micron

Wound Filter Cartridges are designed to meet the most demanding filtration application. They offer an economic, compact, easily installed and maintained filtration system for removal of particles from liquid. are manufactured using the latest winding technology which gives true graded density with denser layers inside and coarser layers outside. This produces superior depth filters with increased filtration capacity, longer service life and higher performance that reduces overall costs.

These are processed into fibers of specific grades using the latest technology. After carding & spinning into roving they are wound into cartridges with cautiously controlled micron rating. From raw materials to finished products we are in control of the quality and filtration characteristics. They are appreciated due to its high dirt holding capacity and rugged construction that allows facing different applications in liquid and gas filtration.
The quality of a wound filter cartridge hugely depends on the type of yarn that is used to make the filter. The material of the core and a controlled manufacturing mechanism that produces a precise micron rating also contribute. One should bear in mind the filtration application and other involved physical and chemical parameters before choosing a string wound filter cartridge.


Filter specification :
Media : Polypropylene, Cotton (CFR 21 Listed) & Glass Fibre Heat Purified
Core : Polypropylene, Tinned Steel, Stainless Steel 304 & 316
Removal Ratings: 1, 3, 5, 10, 25, 50, 75, 100 µm
End Connections: DOE ( Standard ) / SOE (on demand)
Nominal lengths : 9.75, 10, 20, 30 & 40 inches
Outside Diameter: 64 mm(2.5”) 100 mm(4”), 110mm(4.5”) 6”, 8”
Inner Diameter: 28mm
Maximum operating Temp: PP: 80°C. Cotton with SS Core: 120°C; Glass Fibre with SS Core: 400°C
 Recommended Maximum differential pressure: 35psig

20 Inch Wound Cartridge Filter

₹ 85 /Piece Get Latest Price

MaterialPolypropylene, Cotton (CFR 21 Listed) & Glass Fibre Heat Purified
Length20 Inch
Operating TemperaturePP- 80 Degree C, Cotton with SS Core-120 Degree C, Glass Fibre with SS Core- 400 Degree C
CorePolypropylene, Tinned Steel, Stainless Steel 304 & 316
Inner Diameter28 mm
TypeWound
Outside Diameter100 mm
Removal Ratings1, 3, 5, 10, 25, 50, 75, 100 Micron
End ConnectionsDOE ( Standard ) / SOE (on demand)

Wound Filter Cartridges are designed to meet the most demanding filtration application. They offer an economic, compact, easily installed and maintained filtration system for removal of particles from liquid. are manufactured using the latest winding technology which gives true graded density with denser layers inside and coarser layers outside. This produces superior depth filters with increased filtration capacity, longer service life and higher performance that reduces overall costs.

These are processed into fibers of specific grades using the latest technology. After carding & spinning into roving they are wound into cartridges with cautiously controlled micron rating. From raw materials to finished products we are in control of the quality and filtration characteristics. They are appreciated due to its high dirt holding capacity and rugged construction that allows facing different applications in liquid and gas filtration.
The quality of a wound filter cartridge hugely depends on the type of yarn that is used to make the filter. The material of the core and a controlled manufacturing mechanism that produces a precise micron rating also contribute. One should bear in mind the filtration application and other involved physical and chemical parameters before choosing a string wound filter cartridge.


Filter specification :
Media : Polypropylene, Cotton (CFR 21 Listed) & Glass Fibre Heat Purified
Core : Polypropylene, Tinned Steel, Stainless Steel 304 & 316
Removal Ratings: 1, 3, 5, 10, 25, 50, 75, 100 µm
End Connections: DOE ( Standard ) / SOE (on demand)
Nominal lengths : 9.75, 10, 20, 30 & 40 inches
Outside Diameter: 64 mm(2.5”) 100 mm(4”), 110mm(4.5”) 6”, 8”
Inner Diameter: 28mm
Maximum operating Temp: PP: 80°C. Cotton with SS Core: 120°C; Glass Fibre with SS Core: 400°C
 Recommended Maximum differential pressure: 35psig

10 Inch Wound Cartridge Filter

₹ 45 /Piece Get Latest Price

MaterialPolypropylene, Cotton (CFR 21 Listed) & Glass Fibre Heat Purified
TypeWound
ColorWhite
Operating TemperaturePP- 80 Degree C, Cotton with SS Core-120 Degree C, Glass Fibre with SS Core- 400 Degree C
CorePolypropylene, Tinned Steel, Stainless Steel 304 & 316
Inner Diameter28 mm
End ConnectionsDOE ( Standard ) / SOE (on demand)
Outside Diameter64 mm
Nominal lengths10 Inch
Removal Ratings1, 3, 5, 10, 25, 50, 75, 100 Micron

Minimum order quantity: 500 Piece

Wound Filter Cartridges are designed to meet the most demanding filtration application. They offer an economic, compact, easily installed and maintained filtration system for removal of particles from liquid. are manufactured using the latest winding technology which gives true graded density with denser layers inside and coarser layers outside. This produces superior depth filters with increased filtration capacity, longer service life and higher performance that reduces overall costs.

These are processed into fibers of specific grades using the latest technology. After carding & spinning into roving they are wound into cartridges with cautiously controlled micron rating. From raw materials to finished products we are in control of the quality and filtration characteristics. They are appreciated due to its high dirt holding capacity and rugged construction that allows facing different applications in liquid and gas filtration.
The quality of a wound filter cartridge hugely depends on the type of yarn that is used to make the filter. The material of the core and a controlled manufacturing mechanism that produces a precise micron rating also contribute. One should bear in mind the filtration application and other involved physical and chemical parameters before choosing a string wound filter cartridge.



X

Contact Us

Mr. Sekh (Director)
Samr Filtration Private Limited
108, Nilganj Road, Mirhati, PS-Amdanga
Barasat, North 24 Parganas - 700125, West Bengal, India

Get Directions
Send Email
Share:
Thank youYour Enquiry has been sent successfully.